Does anyone out there know of an online source that might have info re
Blanik L-13 parts and availability?

We phoned Vitek of Blanikamerica and heard Vitek's phone message: "we
are operating on a limited basis until april 7; in the meantime we can
only ship parts that you have exact part numbers and that we have in
our local stock"

Our club needs bearings for the control surfaces but don't have the
part number.

Thanks,
Larry

Vitek is traveling in Europe right now. I would just wait until he is back.

Pete

wrote:
> Does anyone out there know of an online source that might have info re
> Blanik L-13 parts and availability?
>
> We phoned Vitek of Blanikamerica and heard Vitek's phone message: "we
> are operating on a limited basis until april 7; in the meantime we can
> only ship parts that you have exact part numbers and that we have in
> our local stock"
>
> Our club needs bearings for the control surfaces but don't have the
> part number.
>
> Thanks,
> Larry

On Apr 1, 10:31*pm, Pete Brown > wrote:
> Vitek is traveling in Europe right now. I would just wait until he is back.
>
> Pete
>
>
>
> wrote:
> > Does anyone out there know of an online source that might have info re
> > Blanik L-13 parts and availability?
>
> > We phoned *Vitek of Blanikamerica and heard Vitek's phone message: "we
> > are operating on a limited basis until april 7; in the meantime we can
> > only ship parts that you have exact part numbers and that we have in
> > our local stock"
>
> > Our club needs bearings for the control surfaces but don't have the
> > part number.
>
> > Thanks,
> > Larry- Hide quoted text -
>
> - Show quoted text -

Vitek has been getting back to me on my L-13 orders, but it's been
taking a day or two to get replies. He has, however, been getting back
to me. Coincidentally we are in the middle of ordering bearings and
bushings for the ailerons on one of our L-13's, so I have the part
numbers for those that Vitek just sent me this week. If that's
helpful, email me off line and I'll send them to you.
Best Regards,
Sandy Stevenson